{{ confirmation.message }}

LoRaMod Config

Type the administration password to continue
{{ loginError }}

Device summary and status

Device is UNPROVISIONED

The LoRaMod device must be provisioned to communicate with other LoRaMod units.

Role

{{ roleAsString }}

Base-band

Device name

Device model

MAC address

Firmware version

Device time

Network key


LoRa Settings

Spreading Factor

Bandwidth


Downstream Nodes

{{ index + 1 }} {{ item.mac }}   {{ LoRaMod.DeviceStateNames[item.state] }}

{{ item.name }} | {{ getDSNodeName (index)}}

Upstream node

{{ upstream.name }} |
{{ upstream.mac }} |
{{ LoRaMod.DeviceStateNames[upstream.state] }}

Device provisioning

Role

Base-band

Device name

Network Key

Enter the network key in hexadecimal format. It must match that of the Upstream node to which this device will be connected.

Change device name

New device name

Change device time

LoRaMod's real time clock provides accurate timing for various logging functionality (e.g, ModBus traffic into internal storage).

The device time can be updated here to the current system time. Note that updates propagate automatically to all downstream nodes that are online.

Current device time

System's local time

Serial ports settings

LoRaMod's serial ports can be configured independently.

{{ LoRaMod.SerialPortNames[index] }}

Baudrate

Data bits

Parity

Stop bits

ModBus Register Cache

Modbus Register Cache

Register value max-age (miliseconds)

LoRa modem settings

Spreading factor

Bandwidth

Downstream nodes

LoRaMod upstream devices currently supports up to four downstream nodes.

Downstream {{ index + 1 }}

Name

MAC address

Pairing state

{{ LoRaMod.DeviceStateNames[item.state] }}

Upstream node

Network Key

Enter the network key (in hexadecimal form) of the Upstream node this device will connect to.

Pairing state

{{ LoRaMod.DeviceStateNames[upstream.state] }}

Device mappings

Device Name

Upstream Modbus Address

Downstream Node

Downstream Serial Port

Downstream Modbus Address

No device mappings defined yet.
Downstream nodes need to be added first.

Upstream Addr

Device Name

Downstream Node

Serial Port

Downstream Addr

{{ item.upstreamAddr }}
{{ item.deviceName }}
{{ ds[item.downstreamIndex].name }}
{{ LoRaMod.SerialPortNames[item.port] }}
{{ item.downstreamAddr }}
🗑

Change administration password

Current password

New password

Confirm new password

Restart the device

Once the device has rebooted, you will be prompted to connect and log in again.

LoRa radio test

Downstream Node

Total number of requests

Number of ModBus registers

Timeout (miliseconds)

LoRa settings

| | Change

Requests

Roundtrip (miliseconds)

Lowest roundtrip

Highest roundtrip

Restore factory settings

Restoring to factory settings will erase all configurations and data, leaving the device in a cleared state. Data recorded on the internal SD card, if any, will also be deleted.

The device will automatically reboot after performing the procedure.

This operation is irreversible!